The performance characteristics of stainless steel resistant to weak corrosive media such as air, steam and water make its products have many advantages in use. For example, stainless steel door jambs are much easier to clean and maintain than solid wood and PVC door jambs. However, it is also necessary to pay attention to regular cleaning in order to be beautiful and practical. The following describes its cleaning skills.

1、要是門套表面有污垢附在上面，可以利用洗潔精水擦拭它的表面。但要注意的是材質是鏡面的還是拉絲的，如果是鏡面的，就要特別注意清潔工具的使用，清潔門套的抹布須干凈無塵。另外，利用專用的清潔劑來清潔門套，就是使用不銹鋼清洗劑或者是護理劑，清除污跡的效果是非常好的，能夠恢復門套的光亮。

1. If there is dirt on the door pocket surface, you can use detergent water to wipe its surface. However, it should be noted whether the material is mirror or wire drawing. If it is mirror, special attention should be paid to the use of cleaning tools. The rag used to clean the door pocket must be clean and dust-free. In addition, use a special cleaner to clean the door pocket, that is, use a stainless steel cleaner or a care agent. The effect of removing stains is very good, which can restore the brightness of the door pocket.

2、如果要除掉門商標以及貼膜的膠帶痕跡，就要利用溫水來進行擦拭，然后利用酒精來擦洗。

2. If you want to remove the door trademark and the tape traces of the film, you should use warm water to wipe, and then use alcohol to scrub.

3、如果是產品表面有漂白劑或者是各種酸，就要用水進行沖洗，再利用中性的碳酸蘇打水進行擦拭。

3. If there is bleach or various acids on the product surface, wash it with water, and then wipe it with neutral carbonated soda water.

4、門套的表面有生銹的話，就要使用10%濃度的硝酸進行清洗，用專門的保養液進行清洗也可以，用類似的顏色涂上，就難以看出清洗的痕跡。

4. If there is rust on the surface of the door pocket, it is necessary to use 10% nitric acid for cleaning. It is also possible to use a special maintenance solution for cleaning. It is difficult to see the traces of cleaning if it is painted with a similar color.

5、假如門套表面有比較頑固的污漬，就使用蘿卜沾上洗潔劑用力擦拭就能夠去除污跡，禁止使用鋼絲球，否則會對門套造成很大傷害。

5. If there are stubborn stains on the surface of the door pocket, you can remove the stains by wiping the radish with detergent. It is forbidden to use steel wire balls, otherwise it will cause great damage to the door pocket.

以上就是為大家介紹的有關電梯門套廠家http://m.k2f3.com的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務.

The above is about the elevator door pocket manufacturers http://m.k2f3.com I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service